Model 75 & 75-1

Oil Supply to CentrifugeOil supply should be taken from a source as close to the
lube oil pump discharge as possible and on the dirty side
of the full flow oil filter. A 1/4” NPT pipe or #6 hose supply
should be used for supply with a full-opening ball valve
installed in supply line to allow the centrifuge to be isolated
for cleaning without shutting the engine down. The
centrifuge will operate efficiently at 30 to 90 psig with the
preferred pressure of 60 to 80 psig.
Clean Oil Return to Sump
The clean oil drain line to the sump should be a 1.0” minimum
diameter unrestricted hose or pipe to a 1.0” connection
located above the oil level is required. Alternate oil fill
openings or drilled-and-tapped holes in crankcase doors
are options that can be used. The oil drain line should be
free of any shut-off valves. The drain is correct if you can
drop in a 1.0” diameter ball and it can freely roll through
the drain line into the engine.
Mounting Considerations
SPINCLEAN™ Centrifuges are high-speed devices and
should be securely mounted to prevent excessive

Return to Products Section
Construction Worker

Not seeing a particular item you're looking for?

Contact Us

Chances are we have it.

Due to the multitude of available parts and pieces, new releases, product discontinuations, replacements, etc., it's possible the item in question or its equivalent is either in stock or otherwise available. We strive to display as much of our products and information online as possible. If we've missed the one you're looking for, we want to know.